![]() ![]() There are a few other things the USB cable is needed for - the complete list is this: We don't use live-view though (not yet anyway), but get the thumbnails from the actual photos you take. (without the usb cable, we need to use the same pins on the 10-pin port for sending GPS data or for reading/writing settings to the camera, so we need to stop doing one thing to start doing the other.ΔΆ) Just as wdaehn said - on the D810 you need the USB cable mainly for Image review. When the USB cable is plugged in (as it is in your screenshot) GPS is sent to the camera in parallel to getting the settings via usb, so there is no "priority" when both things can happen at the same time. This will delay the trigger a tiny bit if you're triggering from the app, but it'll make sure all photos have GPS data embedded. If you don't have GPS data in your photos, try setting the GPS Priority (third picker in the GPS setting) to "GPS" rather than Trigger if the USB Cable is not plugged in. On Canon cameras, we actually change the Interval setting of the camera too (and if you change it in the cameras Menu, it will change in the app as well), and only send the camera the Position in that set interval. On Nikon cameras, the Unleashed actually sends the Position and an updated timestamp to the Camera every second, no matter how often it gets a new position from the smartphone. a longer interval should reduce battery consumption of the smartphone. 1) The GPS interval sets how often the Smartphone calculates the position and sends it to the Unleashed. ![]()
0 Comments
Leave a Reply. |